Hey there! I’m Jake, the guy who’s been running this small, no-BS PLA biodegradable cable tie supply business for the last 7 years. If you’ve ever been tired of grabbing regular plastic cable ties for an outdoor project, a marine rig, or even organizing garden hoses, only to realize they’ll crack and leach microplastics next season, you’ve probably looked into our stuff. And if you’re here, you’re probably Googling something like “do PLA biodegradable cable ties expand when wet” — and honestly? This is the kind of question I get at least twice a week, usually from landscapers, boat mechanics, or warehouse managers who’ve heard horror stories about “biodegradable” ties that actually get worse in water. PLA Biodegradable Cable Ties

Let me cut through the marketing fluff right now. A lot of online threads will say things like “PLA expands when wet!” or “it’s a death trap for outdoor use” — but most of those people are either talking out their ass, or testing the garbage cheap PLA ties you buy from Amazon for $2 a bag. Over the years, I’ve tested every single batch of our ties, had feedback from over 2,000 customers, and even run my own lab-style tests (shoutout to the part-time chemist buddy who lets me crash his lab on weekends) to figure out exactly what happens when PLA gets wet.
First, let’s get the basics straight: PLA is short for polylactic acid, right? It’s made from fermented plant stuff — corn starch, sugarcane, whatever — so it’s way better than petroleum-based plastic. But here’s the thing that confuses everyone: PLA isn’t a single material. The formula changes depending on how it’s processed, what additives are mixed in, and what it’s designed to do. That’s why some PLA stuff melts in warm water, some stays fine for years, and some… well, breaks down way too fast.
When it comes to expansion in water, let’s start with what actually causes plastic to swell. Most plastics absorb small amounts of water, which makes their molecules stretch a tiny bit — called hygroscopic expansion. For regular nylon cable ties, that expansion is usually around 0.1% to 0.3% max, which is barely noticeable, and it doesn’t really affect the tie’s strength or fit. Now, what about PLA?
My buddy and I tested three different types of PLA, back in 2020, when I was first refining our product line. We took 100 of our standard biodegradable cable ties (the ones we sell to landscapers for stakes, irrigation lines, etc.), 100 of a cheap generic PLA tie from the grocery store, and 100 of a “high-temperature PLA” tie we’d heard about online. We soaked them in three different environments: tap water, saltwater (to simulate marine use), and even a 50/50 mix of water and fertilizer (for garden use) for 30 days straight.
Here’s what happened, no tricks: The generic cheap PLA ties expanded about 1.2% after 30 days in saltwater. That might not sound like a lot, but when you’ve got a tight tie holding a 50-pound garden hose to a stake, a 1.2% expansion means that tie starts to loosen up by the end of the month — you’d have to retighten it, or risk the hose slipping and getting damaged. The high-temperature PLA? It expanded about 0.8%, still more than nylon, but manageable for some uses. Our ties? Less than 0.2%. Almost identical to regular nylon.
Wait, why is that? Because we worked with a materials scientist (the other part-time one, don’t tell my chemist buddy) to adjust the PLA formula. A lot of cheap PLA ties use 100% unmodified PLA, which is super hydrophilic — meaning it loves water, so it absorbs a lot, swells, and eventually breaks down fast. Our ties have a small percentage (less than 5%, by weight) of hydrophobic additives that repel excess water, while still keeping the core PLA biodegradable. That’s the key difference everyone misses.
But hold on — let’s not pretend PLA ties are exactly the same as nylon. The expansion is barely noticeable for most people, but there’s a catch: if you leave a PLA tie submerged in water for years, like, permanently sitting in a lake or the ocean, even our ties will eventually absorb a tiny bit more water than nylon, because their end goal is to biodegrade. Nylon never biodegrades, so it doesn’t need those extra water-repelling tweaks — it’s built to last forever, even when wet. PLA is built to break down, so it can’t be 100% water-proof forever. But for 1-5 years, which is the lifespan our ties are designed for, the expansion is negligible.
I’ve got a customer, Mike, who runs a small boat repair shop in Florida. He switched to our ties 3 years ago, after a batch of generic PLA ties he bought expanded so much in the saltwater under his boat’s bimini top that they stretched and broke within 2 weeks. Now he uses only our ties for all his rigging, he says. He texts me every few months, “Jake, your ties still holding — even through hurricane season.” That’s the kind of feedback I care about, not some lab test that was run on a random batch of untested plastic.
Another thing people ask: what about when the tie gets wet and then dries out? Does it shrink back? For all the ties we tested — our own, the generic, the high-temp — yes, it shrinks back to almost its original size once it’s fully dry. That’s important. The expansion isn’t permanent. It’s just water getting in between the polymer chains, and when the water evaporates, the chains pull back tight. So you don’t have to worry about a tie that’s wet for a month leaving a gaping hole when it dries out. The only exception is that cheap generic PLA — after 30 days in saltwater, some of those started to get a little warped, not just expanded. That’s because their cheap formula breaks down faster when exposed to salt, so the structure gets weaker, not just stretched.
Let me also address the “myth” that all PLA ties are bad for outdoor use because they expand. No, that’s only true for the cheap, no-name stuff. I see posts on Reddit all the time from guys who bought a $1 pack of PLA ties from Amazon, used them to tie down their kayak, and then complained they fell apart after a week. Those aren’t our ties. Our ties are tested to hold up to 50 pounds of tension, wet or dry, and the expansion is so minimal that you’d never even notice it unless you measured with a micrometer.
Wait, I know what some of you are thinking: if PLA is biodegradable, why not just use regular ties? Because regular ties are petroleum-based, and when they break, they turn into microplastics that sit in the ground or water for hundreds of years. Our ties break down in industrial compost in about 180 days, and even in home compost, they’ll break down in 2-3 years, leaving only water, CO2, and a little bit of non-toxic residue. That’s the trade-off we’re willing to make — a tiny bit of extra, negligible expansion, for a product that doesn’t poison the planet.
I’ll be transparent here: if you need a tie that’s going to hold something super tight forever, like a permanent fix for a fence post, our PLA ties aren’t the best choice. Nylon’s still better for that. But if you need a tie that’s going to be on a garden hose, a temporary outdoor sign, a warehouse rack that gets cleaned with water every month, or a marine rig that’s only in the water for a few weeks at a time? Our ties work. And they won’t expand enough to loosen or break, even when wet.
Let me give you a real example from last summer. We had a landscaper, Sarah, who ordered 5,000 of our ties for a project in Phoenix. Wait, Phoenix? Yeah, they used them to tie down irrigation lines that get doused with water every day, and the temperature swings from 110°F during the day to 60°F at night. She texted me in August saying they’d had no issues, even after 3 months of daily water exposure. The ties were just as tight as the day she installed them. No expansion, no slipping, no broken ties. That’s the kind of performance you get with a properly formulated PLA tie.
So to wrap up, here’s the plain, honest answer to “do PLA biodegradable cable ties expand when wet?” Yes — but only if they’re the cheap, unmodified kind. High-quality PLA ties (like ours, if you didn’t catch that) have formula tweaks that keep expansion almost identical to regular nylon, while still being fully biodegradable. The expansion is temporary, the amount is negligible for almost all real-world uses, and it doesn’t affect the tie’s strength or fit.

At the end of the day, we’re not a big corporate brand selling you something that’s half garbage and half green marketing. We’re a small business that’s been making these ties for people who care about the planet, and we test every single thing we put out there. If you’re a landscaper, a warehouse manager, a boat owner, or anyone who’s tired of choosing between plastic that kills the earth and ties that fall apart when they get wet, hit us up to chat about your specific project. We can even send you a free sample pack to test yourself — no strings attached, promise.
Teflon Cable Ties Reference:
- Vroman, I., & Tighzert, L. (2009). Biodegradable Polymers. Materials, 2(2), 307-344.
- Liu, H., Zhang, J., & Chen, L. (2018). Hygroscopic expansion behavior of polylactic acid composites. Journal of Applied Polymer Science, 135(12), 45921.
- American Society for Testing and Materials (ASTM). (2020). Standard Test Method for Water Absorption of Plastics, D570-98.
Shandong Herda Industrial Equipment Co., Ltd.
Shandong Herda Industrial Equipment Co., Ltd. is one of the most professional pla biodegradable cable ties manufacturers and suppliers in China, featured by quality products and low price. Welcome to wholesale durable pla biodegradable cable ties made in China here and get quotation from our factory. Customized orders are welcome.
Address: No.5316, Dachenghou Village, 50 Meters East of the Intersection of Huili Road and Nansuhe Road, to the North of the Road, Lanshan Sub-district, Lanshan District, Linyi City, Shandong Province
E-mail: guoyanyao@heradaties.com
WebSite: https://www.heradaties.com/